Products

Ultrasonic Probe Homogenizer

In modern laboratories, ultrasonic homogenizes are used to break cell walls to extract the cell contents, e. g. the proteins without damaging them. A part of the energy introduced into the cell

Ultrasonic Probe Sonicator

Ultrasonic equipment is a kind of equipment that converts electrical energy into high-frequency mechanical vibration. It is mainly composed of an ultrasonic transducer, an horn, a tool head and an

Wide Spray Ultrasonic Atomizer

The wide spray ultrasonic atomizer is an ultrasonic atomization nozzle with a wide spraying area. It adopts ultrasonic atomization nozzle technology, and the carrier gas is dispersed and redirected

Gather Coated Ultrasonic Atomizer

The gather spray ultrasonic nozzle is an ultrasonic atomizing nozzle with a small spraying width. It adopts ultrasonic atomization nozzle technology, and the special contracting flow channel design

Ultrasonic Spray Nozzle System

Orifice size plays a principle role in determining both maximum and minimum flow rates.The maximum flow rate is related to the velocity of the liquid stream as it emerges onto the atomizing surface.

High Temperature Ultrasonic Atomizer

Liquid is introduced to the probe through an inlet on the side, usually by gravity or a low pressure pump. There are different probes for different applications. A flat tip probe, for example, can

Ultrasonic Atomizer Nozzle

In the wave soldering process, the traditional flux spray generally uses air pressure or electromagnetic waves to make the flux atomized, and then sprayed onto the PCBA through a moving specific

Ultrasonic Spray System Nozzles

The ultrasonic power supply converts 50/60 Hz voltage to high frequency electrical energy. This electrical energy is transmitted to a piezoelectric transducer with the converter, where it is changed

Ultrasonic Spray Atomizer Nozzle

The ultrasonic atomizer has a power supply that converts low-frequency electrical energy to high-frequency electrical energy. This electrical energy is then converted into mechanical vibrations by a

Benchtop Ultrasonic Spray Coating System

Liquid is introduced to the probe through an inlet on the side, usually by gravity or a low pressure pump. There are different probes for different applications. A flat tip probe, for example, can