Vacuum Homogenizer Mixer with Water and Oil Pot /Emulsification Machine

After the market development of new Ultrasonic Spray Coating Machine, sonicator with chiller, Laboratory Ultrasonic Homogenizer, the reform of packaging materials, and the expansion of the international market, our company has effectively grasped the market opportunities, and our company's profits have increased year by year. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We are well aware that it is the duty and obligation of enterprises as social citizens to continue to do a good job in social responsibility. We combine brand management with development strategy to continuously improve brand awareness and reputation. The company will continue to adhere to the business philosophy of "honesty and trust", continuously improve the core competitiveness of the company, promote the transformation and upgrading of the industrial structure, and accelerate the conversion of new and old kinetic energy to achieve greater economic and social benefits.

Description:

The dispersing and deagglomeration of solids into liquids is an important application of ultrasonic devices.If powders are wetted, the individual particles build agglomerates and are held together by attraction forces of various physical and chemical natures, including van der Waals forces and liquid surface tension.This effect is stronger for higher-viscosity liquids, such as polymers or resins.The attraction forces must be overcome in order to deagglomerate and disperse the particles into liquid media.

An even dispersion and deagglomeration is important to use the full potential of the particles.

Nano particles offer extraordinary characteristics, which can only be exploited in an evenly dispersed state.The application of mechanical stress, such as generated by ultrasonic cavitation, breaks the particle agglomerates apart. Also, liquid is pressed between the particles. Different technologies are commonly used for the dispersing of powders into liquids.

This includes high-pressure homogenisers, agitator bead mills, impinging jet mills and rotor-stator-mixers.

High-intensity ultrasonication is an interesting alternative to these technologies and particularly for the particle treatment in the nano-size range the only effectual method to achieve the required results.

By high-power/low-frequency ultrasound, high amplitudes can be generated.

Thereby, high-power/low-frequency ultrasound can be used for the processing of liquids such as mixing, emulsifying, dispersing and deagglomeration, or milling.

When sonicating liquids at high intensities, the sound waves that propagate into the liquid media result in alternating high-pressure (compression) and low-pressure (rarefaction) cycles, with rates depending on the frequency.

During the low-pressure cycle, high-intensity ultrasonic waves create small vacuum bubbles or voids in the liquid.

When the bubbles attain a volume at which they can no longer absorb energy, they collapse violently during a high-pressure cycle.

 

Parameter:

Model/Data	Sono-20-1000	Sono-20-2000	Sono-20-3000	Sono-15-3000
Frequency	20±0.5 KHz	20±0.5 KHz	20±0.5 KHz	15±0.5 KHz
Power	1000W	2000W	3000W	3000W
Voltage	110/220V
Temperature	300℃
Pressure	35 MPa
Intensity of sound	20 W/cm²	40 W/cm²	60 W/cm²	60 W/cm²
Max Capacity	10 L/Min	15 L/Min	20 L/Min	20 L/Min
Horn Material	Titanium

RPS-SONIC ultrasonic systems can be run at fairly high solids concentrations.

For example, for silica the breakage rate was found to be independent of the solid concentration up to 50 per cent by weight.Ultrasound can be applied for the dispersing of high-concentration master-batches, processing low and high viscosity liquids.

Dispersing and wet milling by ultrasonic cavitation is a proven technique to achieve evenly distributed dispersions at nano range as well as particle size reduction down to micron- and nano-size.Full control over the parameters of amplitude, pressure, temperature, viscosity and concentration allows us to find the right process adjustment regarding particle characteristics and aimed size.

With ultrasonic industrial processors in the power range between 500W up to 16kW per device it becomes possible to develop specific process setups to fulfil specific requirements.With the wide device range, all steps of development - from first testing to process optimisation and final production - are covered.

The advantages shown above turn ultrasonic dispersing and milling into a potential technology for industrial processing in various sectors, such as for the production of paints and coatings, ink and inkjet, cement and concrete, or cosmetics.

 

Q: Are you trading company or manufacturer?

A: We are professional manufacturer specialized in ultrasonic welding, ultrasonic cutting , ultrasonic atomizer, and ultrasonic liquid processor.

Q: How many different types of products your company manufactures?

A: Now we have more than 100 products. We have a strong advantage of OEM, we can supply technical service , design service and customize service.

Q: When can I get the price?

A: Usually we quote within 8 hours after we get your inquiry.kindly send email to admin@rps-sonic.com if you wanna get price from us.

Our company pays attention to the green needs of users and industry development trends, and is committed to developing and promoting our Vacuum Homogenizer Mixer with Water and Oil Pot /Emulsification Machine with high energy efficiency and resource efficiency. Welcome to visit our firm and factory. We have the advantages of abundant inventory, fast and timely transportation and perfect after-sales service.

Hot Tags: ultrasonic mixing equipment, China, suppliers, manufacturers, factory, custom, Ultrasonic Spray Nozzle, High Intensity Ultrasonic equipment, Ultrasonic Liquid Processors, Cold water mushroom extraction, ultrasonic spray fluxing system, CBD emulsification Equipment

[[ProKeywords]]