Nanoparticles Homogenizer 3000 Watt Ultrasonic Processor Sonochemistry Equipment

The accessories and materials of our sonicator instrument, High Intensity Ultrasonic Liquid Processor, ultrasonic emulsification machine are all from reliable brands so that the design is worth looking forward to and the quality is trustworthy. We are willing to take due responsibility in the process of social development of building a green environmental protection enterprise and creating a harmonious environment. We insist on innovation, breakthrough and stable quality, and implement the corporate spirit of management to improve efficiency. Driven by technological innovation and capital operation, we hope to make our business scale at the forefront of the industry through unremitting efforts and continuous changes. We can carry out independent structural design and R&D work according to customers' needs, and assist customers in preliminary design development and other research work from a professional perspective.

Description:

The dispersing and deagglomeration of solids into liquids is an important application of ultrasonic devices.If powders are wetted, the individual particles build agglomerates and are held together by attraction forces of various physical and chemical natures, including van der Waals forces and liquid surface tension.This effect is stronger for higher-viscosity liquids, such as polymers or resins.The attraction forces must be overcome in order to deagglomerate and disperse the particles into liquid media.

An even dispersion and deagglomeration is important to use the full potential of the particles.

Nano particles offer extraordinary characteristics, which can only be exploited in an evenly dispersed state.The application of mechanical stress, such as generated by ultrasonic cavitation, breaks the particle agglomerates apart. Also, liquid is pressed between the particles. Different technologies are commonly used for the dispersing of powders into liquids.

This includes high-pressure homogenisers, agitator bead mills, impinging jet mills and rotor-stator-mixers.

High-intensity ultrasonication is an interesting alternative to these technologies and particularly for the particle treatment in the nano-size range the only effectual method to achieve the required results.

By high-power/low-frequency ultrasound, high amplitudes can be generated.

Thereby, high-power/low-frequency ultrasound can be used for the processing of liquids such as mixing, emulsifying, dispersing and deagglomeration, or milling.

When sonicating liquids at high intensities, the sound waves that propagate into the liquid media result in alternating high-pressure (compression) and low-pressure (rarefaction) cycles, with rates depending on the frequency.

During the low-pressure cycle, high-intensity ultrasonic waves create small vacuum bubbles or voids in the liquid.

When the bubbles attain a volume at which they can no longer absorb energy, they collapse violently during a high-pressure cycle.

 

Parameter:

Model/Data	Sono-20-1000	Sono-20-2000	Sono-20-3000	Sono-15-3000
Frequency	20±0.5 KHz	20±0.5 KHz	20±0.5 KHz	15±0.5 KHz
Power	1000W	2000W	3000W	3000W
Voltage	110/220V
Temperature	300℃
Pressure	35 MPa
Intensity of sound	20 W/cm²	40 W/cm²	60 W/cm²	60 W/cm²
Max Capacity	10 L/Min	15 L/Min	20 L/Min	20 L/Min
Horn Material	Titanium

RPS-SONIC ultrasonic systems can be run at fairly high solids concentrations.

For example, for silica the breakage rate was found to be independent of the solid concentration up to 50 per cent by weight.Ultrasound can be applied for the dispersing of high-concentration master-batches, processing low and high viscosity liquids.

Dispersing and wet milling by ultrasonic cavitation is a proven technique to achieve evenly distributed dispersions at nano range as well as particle size reduction down to micron- and nano-size.Full control over the parameters of amplitude, pressure, temperature, viscosity and concentration allows us to find the right process adjustment regarding particle characteristics and aimed size.

With ultrasonic industrial processors in the power range between 500W up to 16kW per device it becomes possible to develop specific process setups to fulfil specific requirements.With the wide device range, all steps of development - from first testing to process optimisation and final production - are covered.

The advantages shown above turn ultrasonic dispersing and milling into a potential technology for industrial processing in various sectors, such as for the production of paints and coatings, ink and inkjet, cement and concrete, or cosmetics.

 

Q: Are you trading company or manufacturer?

A: We are professional manufacturer specialized in ultrasonic welding, ultrasonic cutting , ultrasonic atomizer, and ultrasonic liquid processor.

Q: How many different types of products your company manufactures?

A: Now we have more than 100 products. We have a strong advantage of OEM, we can supply technical service , design service and customize service.

Q: When can I get the price?

A: Usually we quote within 8 hours after we get your inquiry.kindly send email to admin@rps-sonic.com if you wanna get price from us.

We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Nanoparticles Homogenizer 3000 Watt Ultrasonic Processor Sonochemistry Equipment. We continue to improve technology, so that the technical performance, internal structure and appearance of the product are of excellent quality. Up to now, our company's scale efficiency is increasingly significant, the market competitiveness is constantly enhanced, and has also obtained unprecedented development opportunities.

Hot Tags: ultrasonic mixing equipment, China, suppliers, manufacturers, factory, custom, Benchtop Ultrasonic Spray Coating System, Spray nozzle, ultrasonic solvent extraction, ultrasonic mixer, Ultrasonic Liquid Processors, Ultrasonic Extraction Equipment

[[ProKeywords]]