Liquid Detergent/Cream Stainless Steel Mixing Mixer Tank with Homogenizing Unit Storage Tank Emulsifying Tank Extraction Unit Tank

Our ultrasonic nanoparticle dispersion, High Intensity Ultrasonic Processor, Paint Dispersion Mixer is inexpensive, experienced, efficient and credible in earning the confidence and cooperation of customers around the world. We comply with the requirements of international, national, provincial and local laws, regulations and standards related to the protection of the environment and human health and safety, and strive to do better. For regions where there are no laws and regulations, or when the regulations are weak and insufficient to guide our business operations, we will apply the best environmental, health and safety (EHS) management practices. We have a thorough knowledge of how to deliver products or services to meet the needs of clients. You are welcome to contact us anytime!

Description:

The dispersing and deagglomeration of solids into liquids is an important application of ultrasonic devices.If powders are wetted, the individual particles build agglomerates and are held together by attraction forces of various physical and chemical natures, including van der Waals forces and liquid surface tension.This effect is stronger for higher-viscosity liquids, such as polymers or resins.The attraction forces must be overcome in order to deagglomerate and disperse the particles into liquid media.

An even dispersion and deagglomeration is important to use the full potential of the particles.

Nano particles offer extraordinary characteristics, which can only be exploited in an evenly dispersed state.The application of mechanical stress, such as generated by ultrasonic cavitation, breaks the particle agglomerates apart. Also, liquid is pressed between the particles. Different technologies are commonly used for the dispersing of powders into liquids.

This includes high-pressure homogenisers, agitator bead mills, impinging jet mills and rotor-stator-mixers.

High-intensity ultrasonication is an interesting alternative to these technologies and particularly for the particle treatment in the nano-size range the only effectual method to achieve the required results.

By high-power/low-frequency ultrasound, high amplitudes can be generated.

Thereby, high-power/low-frequency ultrasound can be used for the processing of liquids such as mixing, emulsifying, dispersing and deagglomeration, or milling.

When sonicating liquids at high intensities, the sound waves that propagate into the liquid media result in alternating high-pressure (compression) and low-pressure (rarefaction) cycles, with rates depending on the frequency.

During the low-pressure cycle, high-intensity ultrasonic waves create small vacuum bubbles or voids in the liquid.

When the bubbles attain a volume at which they can no longer absorb energy, they collapse violently during a high-pressure cycle.

 

Parameter:

Model/Data	Sono-20-1000	Sono-20-2000	Sono-20-3000	Sono-15-3000
Frequency	20±0.5 KHz	20±0.5 KHz	20±0.5 KHz	15±0.5 KHz
Power	1000W	2000W	3000W	3000W
Voltage	110/220V
Temperature	300℃
Pressure	35 MPa
Intensity of sound	20 W/cm²	40 W/cm²	60 W/cm²	60 W/cm²
Max Capacity	10 L/Min	15 L/Min	20 L/Min	20 L/Min
Horn Material	Titanium

RPS-SONIC ultrasonic systems can be run at fairly high solids concentrations.

For example, for silica the breakage rate was found to be independent of the solid concentration up to 50 per cent by weight.Ultrasound can be applied for the dispersing of high-concentration master-batches, processing low and high viscosity liquids.

Dispersing and wet milling by ultrasonic cavitation is a proven technique to achieve evenly distributed dispersions at nano range as well as particle size reduction down to micron- and nano-size.Full control over the parameters of amplitude, pressure, temperature, viscosity and concentration allows us to find the right process adjustment regarding particle characteristics and aimed size.

With ultrasonic industrial processors in the power range between 500W up to 16kW per device it becomes possible to develop specific process setups to fulfil specific requirements.With the wide device range, all steps of development - from first testing to process optimisation and final production - are covered.

The advantages shown above turn ultrasonic dispersing and milling into a potential technology for industrial processing in various sectors, such as for the production of paints and coatings, ink and inkjet, cement and concrete, or cosmetics.

 

Q: Are you trading company or manufacturer?

A: We are professional manufacturer specialized in ultrasonic welding, ultrasonic cutting , ultrasonic atomizer, and ultrasonic liquid processor.

Q: How many different types of products your company manufactures?

A: Now we have more than 100 products. We have a strong advantage of OEM, we can supply technical service , design service and customize service.

Q: When can I get the price?

A: Usually we quote within 8 hours after we get your inquiry.kindly send email to admin@rps-sonic.com if you wanna get price from us.

We adhere to the concept of high quality, high requirements and high performance, and provide reliable Liquid Detergent/Cream Stainless Steel Mixing Mixer Tank with Homogenizing Unit Storage Tank Emulsifying Tank Extraction Unit Tank and services to users. The scale of our company is expanding, and the output value and benefit are growing simultaneously. Our company with excellent product quality, quality and timely service concept, honest and trustworthy business quality and professional ethics, has won the trust and praise of domestic and foreign dealers.

Hot Tags: ultrasonic mixing equipment, China, suppliers, manufacturers, factory, custom, Industrial Ultrasonic Devices, Ultrasonic CBD Emulsification Equipment, 28Khz Probe Sonicator, High Intensity Ultrasonic equipment, Ultrasonic Atomizer Nozzle, 20Khz Ultrasonic dispersion equipment

[[ProKeywords]]