Laboratory Ultrasonic Emulsification Equipment Ultrasonic Sonicator Probe

We have a high quality production technology team and complete sets of production equipment, and a sense of ultrasonic cannabis oil emulsification device, High Efficientive Ultrasonic Dispersion Equipment, Emulsification Machine quality to the highest level of precision and sincerity. We are committed to building our company into an enterprise with many famous brand-name products, strong competitive strength and good economic benefits. With the basic starting point of improving efficiency and economic benefits, we have boldly carried out various system innovations and made new achievements continuously. Our company has strong technical force, advanced production technology, exquisite testing means and perfect quality assurance system.

Description:

The dispersing and deagglomeration of solids into liquids is an important application of ultrasonic devices.If powders are wetted, the individual particles build agglomerates and are held together by attraction forces of various physical and chemical natures, including van der Waals forces and liquid surface tension.This effect is stronger for higher-viscosity liquids, such as polymers or resins.The attraction forces must be overcome in order to deagglomerate and disperse the particles into liquid media.

An even dispersion and deagglomeration is important to use the full potential of the particles.

Nano particles offer extraordinary characteristics, which can only be exploited in an evenly dispersed state.The application of mechanical stress, such as generated by ultrasonic cavitation, breaks the particle agglomerates apart. Also, liquid is pressed between the particles. Different technologies are commonly used for the dispersing of powders into liquids.

This includes high-pressure homogenisers, agitator bead mills, impinging jet mills and rotor-stator-mixers.

High-intensity ultrasonication is an interesting alternative to these technologies and particularly for the particle treatment in the nano-size range the only effectual method to achieve the required results.

By high-power/low-frequency ultrasound, high amplitudes can be generated.

Thereby, high-power/low-frequency ultrasound can be used for the processing of liquids such as mixing, emulsifying, dispersing and deagglomeration, or milling.

When sonicating liquids at high intensities, the sound waves that propagate into the liquid media result in alternating high-pressure (compression) and low-pressure (rarefaction) cycles, with rates depending on the frequency.

During the low-pressure cycle, high-intensity ultrasonic waves create small vacuum bubbles or voids in the liquid.

When the bubbles attain a volume at which they can no longer absorb energy, they collapse violently during a high-pressure cycle.

 

Parameter:

Model/Data	Sono-20-1000	Sono-20-2000	Sono-20-3000	Sono-15-3000
Frequency	20±0.5 KHz	20±0.5 KHz	20±0.5 KHz	15±0.5 KHz
Power	1000W	2000W	3000W	3000W
Voltage	110/220V
Temperature	300℃
Pressure	35 MPa
Intensity of sound	20 W/cm²	40 W/cm²	60 W/cm²	60 W/cm²
Max Capacity	10 L/Min	15 L/Min	20 L/Min	20 L/Min
Horn Material	Titanium

RPS-SONIC ultrasonic systems can be run at fairly high solids concentrations.

For example, for silica the breakage rate was found to be independent of the solid concentration up to 50 per cent by weight.Ultrasound can be applied for the dispersing of high-concentration master-batches, processing low and high viscosity liquids.

Dispersing and wet milling by ultrasonic cavitation is a proven technique to achieve evenly distributed dispersions at nano range as well as particle size reduction down to micron- and nano-size.Full control over the parameters of amplitude, pressure, temperature, viscosity and concentration allows us to find the right process adjustment regarding particle characteristics and aimed size.

With ultrasonic industrial processors in the power range between 500W up to 16kW per device it becomes possible to develop specific process setups to fulfil specific requirements.With the wide device range, all steps of development - from first testing to process optimisation and final production - are covered.

The advantages shown above turn ultrasonic dispersing and milling into a potential technology for industrial processing in various sectors, such as for the production of paints and coatings, ink and inkjet, cement and concrete, or cosmetics.

 

Q: Are you trading company or manufacturer?

A: We are professional manufacturer specialized in ultrasonic welding, ultrasonic cutting , ultrasonic atomizer, and ultrasonic liquid processor.

Q: How many different types of products your company manufactures?

A: Now we have more than 100 products. We have a strong advantage of OEM, we can supply technical service , design service and customize service.

Q: When can I get the price?

A: Usually we quote within 8 hours after we get your inquiry.kindly send email to admin@rps-sonic.com if you wanna get price from us.

Our company constantly improves the production process, accurately controls the product manufacturing process, and produces multi specification and high-quality Laboratory Ultrasonic Emulsification Equipment Ultrasonic Sonicator Probe. Our company strengthens the strategic management, combines own reality, chooses the management characteristic strategy and the high and new technology. 'Quality oriented, honest and trustworthy cultivation' is a golden key for our company to expand the market and develop the enterprise. Our company adheres to the quality and benefit oriented road.

Hot Tags: ultrasonic mixing equipment, China, suppliers, manufacturers, factory, custom, sonicator with chiller, Ultrasonic Extraction Equipment, ultrasonic emulsification machine, herbal extraction equipment, ultrasonic probe mixer, Ultrasonic Spray Nozzle

[[ProKeywords]]