
Knw-D Pharmaceutical Automatic Stainless Steel Low Pressure Herbal Liquid Decocting and Packing Integrated Machine Herbal Extraction Equipment
The superiority of ultrasonic extraction of Chinese medicinal materials is based on the special physical properties of ultrasonic 0 sonochemical 1_copy.jpg.
Product Details
We will continue to provide our customers with the best products at the best prices, and we are ready to provide technical services for casting and finishing to meet the ever-changing needs of our Oil Extraction Machine, Mushroom extraction equipment, ultrasound sonicator. We insist on pioneering and innovating, seeking development based on the market, and are committed to providing customers with high-quality products. Our final goal is 'To try the best, To be the Best'.
Description:
In ultrasonic extraction, mechanical energy generated by ultrasonic waves is applied to the sample (as shown in the figure below). This sonication results in cavitation, the creation of small vacuum bubbles or voids in the liquid that burst onto the solid sample, resulting in localized high temperatures (~4500°C) and pressure (~50 MPa). These forces produce effects such as sonication, disruption of cell membranes and extraction of intracellular material.
1. Application in nicotine extraction
The nicotine component in tobacco has high use value in agriculture and medicine, and the nicotine component in tobacco can be effectively extracted by using ultrasonic extraction technology. In this aspect of application research, the researchers mainly investigated the influence of factors such as extractant concentration, solid-liquid ratio, extraction time, and ultrasonic temperature on the extraction efficiency of nicotine components. 40% methanol as the extractant, the solid-liquid ratio was 1:20, the extraction time was 30 minutes, the ultrasonic temperature was 150°C, and the extraction rate of nicotine could reach about 7%. Chu Zhibing and others used 0.4% NaOH as the extractant, the solid-liquid ratio was 1:40, and the ultrasonic extraction time at room temperature was 4 hours, and the extraction rate of nicotine was 2.12%. 78% ethanol was used as the extractant, the solid-liquid ratio was 1:5, the extraction time was 30min, and the ultrasonic temperature was 52°C.
The extraction amount of nicotine is 23.1mg/mL. Using 95% ethanol with pH = 4 as solvent, solid-liquid ratio 1:15, ultrasonic temperature 80 ℃ extraction twice, each 45min, nicotine extraction rate can reach 95.42%, comparative analysis shows that its extraction effect is obviously better than heating Reflux extraction (the latter is only 84.79%).

2. Application in extraction of total flavonoids from lotus seed heart
Taking lotus seed heart as the test material and ethanol solution as the extractant, ultrasonic extraction method was used to conduct single factor test and L9(34) orthogonal test to study the effects of ethanol concentration, extraction time, solid-liquid ratio and extraction temperature on the extraction rate of total flavonoids. Influence. The results show that the main factor affecting the extraction rate of total flavonoids in lotus seeds is the concentration of ethanol, followed by extraction temperature, solid-liquid ratio, and ultrasonic extraction time; the optimal conditions for extraction are: ethanol concentration 60%, extraction temperature 70°C, Ratio 1:24g/mL, ultrasonic extraction time 30min, the extraction rate of total flavonoids obtained under this condition is 10.86mg/g.

3. Application in Lycium barbarum polysaccharide extraction
The extraction process of Lycium barbarum polysaccharides was extracted by ultrasonic wave, the content of Lycium barbarum polysaccharides was measured by spectrophotometric colorimetry, and the extraction process of Lycium barbarum polysaccharides by ultrasonic-assisted water leaching was systematically studied through the stop-cross experiment, and the optimal process was determined, namely: at 50 ℃, material-water ratio of 1:60, soaking for 2.5 hours, ultrasonic extraction for 5 minutes, the highest extraction rate of polysaccharides was 50.36%.

Parameter:
|
Model/Data |
Sono-20-1000 |
Sono-20-2000 |
Sono-20-3000 |
Sono-15-3000 |
|
Frequency |
20±0.5 KHz |
20±0.5 KHz |
20±0.5 KHz |
15±0.5 KHz |
|
Power |
1000W |
2000W |
3000W |
3000W |
|
Voltage |
110/220V |
|||
|
Temperature |
300℃ |
|||
|
Pressure |
35 MPa |
|||
|
Intensity of sound |
20 W/cm² |
40 W/cm² |
60 W/cm² |
60 W/cm² |
|
Max Capacity |
10 L/Min |
15 L/Min |
20 L/Min |
20 L/Min |
|
Horn Material |
Titanium |
|||
Advantages
1) No need for high temperature. Ultrasonic intensified extraction at 40℃-50℃ water temperature F, ultrasound can promote plants
2) Atmospheric extraction, good safety, simple operation and convenient maintenance.
3) High extraction efficiency. The best extraction rate can be obtained after 20-40 minutes of ultrasonic enhanced extraction, basically
4) It has a broad spectrum. The applicability is wide, and most of the various components of Chinese medicinal materials can be extracted by ultrasonic.
5) Ultrasonic extraction has little relationship with the properties of the solvent and the target extract. Therefore, there are many types of extraction solvents to choose from and a wide range of target extracts.
6) Reduce energy consumption. Because ultrasonic extraction does not require heating or the heating temperature is low, the extraction time is short, so energy consumption is greatly reduced.
7) The processing capacity of medicinal raw materials is large, doubled or several times higher, and there are few impurities, and the effective ingredients are easy to separate and purify.
8) The extraction process has low cost and significant comprehensive economic benefits.
We have recruited a large number of scientific and technological talents and management talents to improve the quality our Knw-D Pharmaceutical Automatic Stainless Steel Low Pressure Herbal Liquid Decocting and Packing Integrated Machine Herbal Extraction Equipment and the management level of our company. We continue to increase investment in talent development and promote major talent projects. We firmly believe in the service idea of selling credit first, and selling products later. Therefore, being serious will become a habit of us and we will do our best to solve problems for customers with due diligence.
Hot Tags: industrial ultrasound equipment, China, suppliers, manufacturers, factory, custom, sonication Cell disruptor, emulsifying equipment, probe type sonicator, Ultrasonic Liquid Emulsification Equipment, Liquid Emulsification Equipment, Industrial Ultrasound Equipment
[[ProKeywords]]Send Inquiry
