High Quality Ultrasonic Extraction Machine with Solvent Recovery

We always insist on giving full play to the cost-effective advantages of our Ultrasonic CBD Emulsification Equipment, Ultrasonic Spray Coating Machine, Ultrasonic Mixer probe to serve all of our customers. Our company operates in strict accordance with the regulations and procedures of quality management system in the whole process of product design, material selection, manufacturing and assembly, quality inspection, etc. The company has formed close cooperation in many aspects and forms with a number of well-known scholars, experts and professors from colleges and universities that are at the forefront of technology at home and abroad.

What's sonication?

Ultrasonic Emulsifieris a soundwave technology widely used in biofuels, pharmaceuticals, wastewater processing, and other major industries. It's also necessary for nanoemulsions and other nanoparticle production — which might sound familiar as it's now widely used within the cannabidiol (CBD) sector too.

But, ultrasonic technology may be helpful for more than just nanoemulsion. This high-frequency technology is getting applied to the extraction side of the industry as well.

By and large, the cannabis extraction world today relies almost exclusively on traditional extraction technologies that use solvents, heat, and pressure. But what if there was a way to improve upon the current solvent standards。

 

Parameter:

Model/Data	Sono-20-1000	Sono-20-2000	Sono-20-3000	Sono-28-500
Frequency	20±0.5 KHz	20±0.5 KHz	20±0.5 KHz	28 KHz
Power	1000W	2000W	3000W	500W
Voltage	110/220V
Temperature	300℃
Pressure	35 MPa
Intensity of sound	20 W/cm²	40 W/cm²	60 W/cm²	10W/cm²
Max Capacity	10 L/Min	15 L/Min	20 L/Min	1 L/Min
Horn Material	Titanium
We will recommend you combine 28Khz and 20Khz , to get smaller particles

 

Advantages:

Improve the emulsification effect

According to the droplet size of the dispersed phase, emulsions can be classified into microemulsions (10–100 nm), nanoemulsions (100–1000 nm) and macroemulsions (0.5–100 μm). Ultrasound is an effective method for reducing the particle size of dispersions and emulsions. Ultrasonic emulsification equipment can obtain emulsions with small particle size (only 0.2–2 μm) and narrow droplet size distribution (0.1–10 μm), and the use of emulsifiers can also increase the concentration of the emulsion by 30% to 70%.

Enhance emulsion stability

By nature, emulsions are kinetically unstable, do not form spontaneously, and will separate into their constituent phases if their stability is not controlled. Therefore, to stabilize the newly formed droplets of the dispersed phase against coalescence, emulsifiers and stabilizers are added to the emulsion. Phacoemulsification requires the use of little or no emulsifiers to obtain stable emulsions. After ultrasonic treatment, the emulsion can maintain stability for several months or more than half a year.

Control lotion type

Under certain conditions, both "water-in-oil" and "oil-in-water" emulsions can be produced by ultrasonic techniques. The traditional emulsification method can only control the properties of the emulsion by adding an emulsifier, and the type of the emulsion cannot be changed by purely mechanical methods. Ultrasonic emulsification equipment makes the emulsification process more convenient and flexible.

low power consumption

The power consumption of phacoemulsification is small, and the power consumption required to manufacture the same volume of emulsion is less than that of a high-pressure homogenizer. To manufacture an emulsion with a capacity of 4.55 m3/h and a droplet size of 1 μm, if ultrasonic emulsification technology is used, only a driving force of 57 HP is required at a working pressure of 10.514.1kg/cm2, but the high-pressure homogenizer is at 70.3351.6kg /cm2 of working pressure requires 4050 HP of driving force, so the use of phacoemulsification technology can reduce a lot of energy Consumption.

Improve the efficiency of emulsification

Ultrasonic emulsification can produce emulsions that cannot be produced by general emulsification methods. As the energy density increases, the droplet size decreases. At an appropriate level of energy density, phacoemulsification can achieve an average droplet size of less than 1 μm. Ultrasound makes the whole emulsification process faster and the purity of the produced emulsion is higher.

Our organization has strived to establish a highly efficient and stable employees team and explored an effective high-quality command method for High Quality Ultrasonic Extraction Machine with Solvent Recovery. In order to improve the efficiency of business operations, our company has established a sales service center and a technical service center to provide customers with perfect, high-quality and efficient professional services with strong production capacity, professional service team, good brand image and stable management system . We sincerely cooperate with new and old customers at home and abroad. The recognition and support from all walks of life make us more confident.

Hot Tags: ultrasonic cannabidiol emulsifier, China, suppliers, manufacturers, factory, custom, Industrial Ultrasonic Homogenizer, ultrasonic probe mixer, Ultrasonic Spray Atomizer Nozzle, Ultrasonic Homogenizers For Liquid Processing, Benchtop Ultrasonic Spray Coating System, Ultrasonic Spray Systems

[[ProKeywords]]