Erikc Dlla155p2626 Diesel Injector Nozzles Dlla 155p2626 Spraying Systems Nozzle Dlla 155 P 2626 for Bosch
The ultrasonic atomizer has a power supply that converts low-frequency electrical energy to high-frequency electrical energy. This electrical energy is then converted into mechanical vibrations by a piezoelectric transducer, which is typically made of ceramic.
Product Details
We take the market as the guide, efficiency as the center, and improve the competitiveness of the Spraying systems, Ultrasonic mist nozzle, Wide coated ultrasonic atomizer industry as the path to build a sales and service system covering both at home and abroad. For customers' various problems in product purchase and use, we can provide timely and effective pre-sales, in-sales and after-sales services to maximize customer utility and satisfaction. We strive to create a new situation of talent work, to help achieve the strategic goals of the company's development.
what is ultrasonic atomization:
The core principle of ultrasonic atomization spraying equipment is to use an ultrasonic transducer to convert electrical energy into high-frequency mechanical vibrations, breaking the liquid into tiny droplets. Airflow and relative motion then evenly spray the droplets onto the substrate surface. Essentially, it leverages the high-frequency vibrations of ultrasound to achieve efficient and precise atomization and deposition of liquids.
Types of ultrasonic atomizer:
Depending on the application of ultrasonic atomizer , we divide ultrasonic atomizer into four types:
● Wide coated ultrasonic atomizer
● Gather coated ultrasonic atomizer
● fluxing ultrasonic atomizer
● high temperature ultrasonic atomizer
Customers can tell us your application information too get suitable equipment.
What ultrasonic atomization consist with?
1. Ultrasonic Atomization: The key of Converting Liquids into Tiny Droplets
The key to ultrasonic atomization lies in the effect of ultrasonic vibrations on the liquid, primarily achieved through an ultrasonic transducer and atomizing head (vibrator):
Ultrasonic Generation
2.The high-frequency power supply in the device generates an electrical signal at a specific frequency (we can supply 40kHz to 120kHz, higher frequency , smaller atomized particles) and transmits it to the ultrasonic transducer (made of a piezoelectric material such as piezoelectric ceramic).
The piezoelectric material mechanically vibrates under the influence of an alternating electric field (the inverse piezoelectric effect), converting electrical energy into high-frequency mechanical vibration energy, generating ultrasonic waves.
3.The Liquid Atomization Process
Ultrasonic vibrations are transmitted through the atomizing head (vibrator surface) to the liquid to be atomized (such as paint, pharmaceuticals, nano-slurries, etc.). When liquid comes into contact with the high-frequency vibrating atomizer head, the vibrational energy creates dramatic tension fluctuations on the liquid's surface.
Tiny "standing waves" form on the liquid's surface. The tension at the wave crests exceeds the surface tension of the liquid, causing the liquid to break into numerous droplets with tiny diameters (typically 1-100μm, adjustable by frequency; higher frequencies produce finer droplets).
These droplets gain kinetic energy from the vibrations, breaking away from the liquid's surface and forming a uniform aerosol (mist-like particles).
Advantage:
1. Highly controllable spraying avoids rework costs caused by excessive spraying.
2. The thickness of the flux can be controlled, and the coating thickness is as thin as 20 microns.
3. The uniform flux layer eliminates the floating of the die, which may cause the die and the substrate to be scrapped.
4. It can accommodate a processing tray composed of a variety of substrate configurations.
5. Non-clogging ultrasonic spraying requires very little cleaning work and has high repeatability.
6. It is verified to be compatible with indium flux.
|
Ultrasonic atomizer information |
|
|
1.why use ultrasonic |
More even material save thinner |
|
2.what's the material |
Water or others |
|
3.temperature |
Temperature____--____ ℃ |
|
4.Atomize capacity |
______L/min |
|
5.Particle size requirements |
|
|
6.Spray width requirements |
|
Q: When can I get the price?
A: Usually we quote within 8 hours after we get your inquiry.kindly send email to admin@rps-sonic.com if you wanna get price from us.
Q: What's your MOQ?
A: If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer's exact situation.
Q: How long is your delivery time?
A: The general delivery time is 2 days after receiving your payment. Anther, if customized equipment, it takes about 10 days.
Q: Do you provide sample test ? Is it free?
A: Yes, we can supply sample test free, you can delivery material to us, we will test and video for you.
Our Erikc Dlla155p2626 Diesel Injector Nozzles Dlla 155p2626 Spraying Systems Nozzle Dlla 155 P 2626 for Bosch with excellent product performance and a wide range of market applications, reflecting a huge market space and development potential. We rely on institutional innovation to promote the orderly and comprehensive growth of our employees and the efficient, healthy and sustainable development of our company. We sincerely serve every customer, not just simple production and sales, but strive to make everyone feel satisfied.
Hot Tags: ultrasonic spray atomizer nozzle, China, suppliers, manufacturers, factory, custom, Ultrasonic CBD Emulsification Equipment, ultrasonic atomizing nozzle, Precision Ultrasonic Spray Coating System, 20Khz Ultrasonic dispersion equipment, High Efficientive Ultrasonic Dispersion Equipment, ultrasonic emulsifying machine
[[ProKeywords]]Send Inquiry