Forms of Ultrasonic Graphene Dispersion Equipment and Methods for Improving Efficiency

The ultrasonic graphene dispersion equipment is composed of three parts: ultrasonic vibration parts, ultrasonic driving power supply and reaction kettle. Vibrational energy is emitted into the liquid. The transducer converts the incoming electrical energy into mechanical energy, ie ultrasound.

The performance form of the ultrasonic graphene dispersion device is that the energy drag device performs back and forth telescopic motion in the longitudinal direction, and the amplitude is generally several micrometers. This kind of amplitude power density is not enough and cannot be used directly. The horn amplifies the amplitude according to the design requirements, and the isolation reaction and the energy dragging device also play a role in fixing the entire ultrasonic vibration system. The tool head is connected with the horn, the horn transmits the ultrasonic energy vibration to the tool head, and then the tool head emits the ultrasonic energy into the chemical reaction liquid. Outside the area, two east flows are formed, and the slurry is fully circulated and turned. There are various forms of electromagnetic speed regulation, frequency conversion speed regulation and explosion-proof frequency conversion speed regulation. The stepless speed regulation function can fully meet the different process requirements in each process, and different speeds can be selected according to different process stages.

Ultrasonic graphene dispersion equipment can effectively improve production efficiency and product quality, and is suitable for mixing various types of fluids from low viscosity to high viscosity. It is widely used in architectural coatings, thermal agent paints, printing oil curtain glue and other manufacturing industries.

1. There are two sets of dispersing systems, the dispersing capacity is much larger than that of the single-shaft dispersing machine, the efficiency is high, and the speed is fast.

2. The double-end bearing at the upper end of the dispersing shaft is centered, and the double-end rolling bearing is installed with a span, which can effectively avoid the shaking under the dispersing shaft.

3. It is used for hydraulic lifting, adjust the relative height of hydraulic lifting according to the relative height of the medium of the dispersion cylinder, so that the installation of the dispersion plate on the bobbin is more conducive to the specific position of the dispersion work

The 4-liquid lifting and simultaneous dispersing machine can rotate 360 at will. The elevator and the movement function are closely combined, and it can be quickly changed to another cylinder to work dispersing and dispersing. The two-axis high-speed disperser with superior performance is generally equipped with 2 to 4 dispersing cylinders, and the productivity is higher. .